Advanced search

14 search results

Page 1 out of 2 Pages

Wireless Products General: How do I check the health of my QolorPoint Battery?
Answer: o Open Fixture and remove the battery o Disconnect all wires from the battery o Use a multimeter to test voltage o Is voltage 24v or higher? ▪ Yes, ...
Multiverse Transmitter: Unit does not power up
Answer: -Check that power cable is properly installed. -Test power outlet with another device. ...
SHoW Baby: Unit does not power up
Answer: Check that power cable is properly installed. Test power outlet with another device. ...
Wireless Products General: My Transmitter (5902, 5903, 5910, 5911, 5912, 7400-5902, 7400-5903) has no obstructions between it and
Answer: Some newer high efficiency glass does not allow RF signal to pass through it. Try moving the Transmitter away from the window and test again. ...
Multiverse Transmitter: How to on how to connect Luminaire to the Multiverse Transmitter 5910, 5911, 5912?
Answer: 1) Turn on Multiverse Transmitter2) Connect to Multiverse Transmitter with DMXCat app on device3) Go to RDM Controller4) Press the RDM arrow on the Multiverse ...
Receiver Card: We’re using the 5906/5907 receiver card one of the electricians reversed the polarity on the
Answer: The 5906/5907 you most likely blew a fuse, F3. You can test it with a meter but it will likely need to come in to ...
Receiver Card: We are trying to have the receiver cards hold the last DMX scene when DMX
Answer: The DMX fail settings only work for the 0-10V/PWM output.When the source DMX stops, the DMX output of the receiver card also stops, therefore it ...
Multiverse Vero: 7400-5902/7400-5903 Unit does not power up
Answer: - Check that power input wiring is properly installed.- Test power outlet with another device. ...
Multiverse Node: My 5902/5903 Node does not power up
Answer: - Check that power cable is properly installed.- Check that you are using the DC supply that has the locking ring on the barell adaptor, ...
DMXcat: Is there any issue with plugging the DMXCat 6000 into a receptacle and using it
Answer: The DMXCat 6000 is intended to be used as a test tool not as a controller. After 8 hours of nonuse the DMXCat will power ...

The most popular searches are:

show baby 88x IP 78x dmxcat 61x dimmer 49x connect 10 45x Test 39x showbaby 33x 5942 29x 5943 20x configurator 18x