T

• Transmitter Setup
  Although a simple Multiverse SHoW Baby system will have one transmitter and one or more receivers, you can use up to six Multiverse SHoW Baby units ...
• The 0-10v output isn’t working on my 5906/5907 Receiver Card.
  - Check that 0-10V mode is enabled with the USB configurator.- Double check console patch and park functions. Try controllingdirectly by address.- Confirm the Receiver ...
• The PWM outputs aren’t working on my 5906/5907 Receiver Card.
  - Double check that PWM output is enabled with the USBconfigurator.- Double check console patch and park. Confirm addressing withDMX map in manual.- Double check ...
• The RadioScan dongle has one multicolor LED indicator light. What do the colors mean?
  Red - Powered, no connection to computerGreen - Powered, connected to computerBlue - Powered, connected, and application is connectedFlashing Blue - Powered, connected, application is ...
• The fixture I need is not in the 6000 DMXCat fixture library. How do I request it be added?
  Please email DMXCatdbreport@citytheatrical.com with the fixture profile information and it will be added within 24 to 48 hours. ...
• The battery on my QolorPoint 7000 is failing. How can I test the battery life?
  o Open Fixture and remove the batteryo Disconnect all wires from the batteryo Use a multimeter to test voltageo Is voltage 24v or higher?▪ Yes, ...
• The Quality LEDs are flashing in sequence on my RX car 5906/5907. What does this indicate?
  The RX Card is stuck in bootloader/programming mode when the signal leds are flashing in sequence. Plug the unit into a laptop while pressing the ...
• The screen on my node keeps turning off/won't turn off. How do I change this?
  On the device go to the menu settings and select Backlight Timeout. Here you can change the time from 10 seconds to 1 hour or ...
• The screen of my node is too bright but I need to keep it on. Can I edit this?
  Go to the menu settings on the device and select Backlight Level. Here you can go from 1% brightness to 100%. ...
• The lid latch on my AquaFog 3300 has broken. Can I order a replacement?
  Yes, please contact our sales team and request pricing for part number 1690004. ...