o Open Fixture and remove the battery
o Disconnect all wires from the battery
o Use a multimeter to test voltage
o Is voltage 24v or higher?
▪ Yes, continue with the checklist
▪ No, replace the battery and start again
o Reconnect the battery to the fixture. (Do not put the unit back
together yet.)
o Run a test function for 4 and a quarter hours
o Test function setup:
▪ Hold the up and down arrows and press the power button.
▪ Let go of all buttons. This will do a master reset and make
the light turn on in Lee 02.
▪ Turn off the power and turn the power back on.
▪ Go to ‘Change Settings’
▪ Go to ‘ BRIGHTENS Control’
▪ Set to 75%
▪ Back out to the main menu
▪ Go to ‘Change Function’ > ‘Function Custom’ > ‘Custom
Color’ > Red 255 > Green 255 > Blue 255 > White 255.
▪ Run test for 4 and a quarter hours.
o Did the QolorPoint stay on for 4 and a quarter hours or more?
o Yes, the test is complete and your battery has passed.
o No, your battery should be replaced.